Awus036nh Aircrack For Mac

1. Download Aircrack Wifi Hack

Guide to install AirCrack-ng on Mac OSX 10.8 Mountain Lion in 5 simple steps. What is Aircrack? Aircrack-ng is a network software suite consisting of a detector, packet sniffer, WEP and WPA/WPA2-PSK cracker and analysis tool for 802.11 wireless LANs. It works with any wireless network interface controller whose driver supports raw monitoring mode and can sniff 802.11a, 802.11b and 802.11g traffic. The program runs under Linux and Windows; the Linux version has been ported to the Zaurusand Maemo platforms, and a proof-of-concept port has been made to the iPhone. Instructions to install AirCrack-ng on Mac 1. Download and install Xcode Xcode Information – Download Link – / 2.Download Xcode Command Line Tools Developer Website – To install the tools, go to the Downloads tab within the Xcode Preferences menu and click “Install” next to the Command Line Tools entry.

Download and install MacPorts The MacPorts Project is an open-source community initiative to design an easy-to-use system for compiling, installing, and upgrading either command-line, X11 or Aqua based open-source software on the Mac OS X operating system. To that end we provide the command-line driven MacPorts software package under a BSD License, and through it easy access to thousands of ports that greatly simplify the task of compiling and installing open-source software on your Mac. Download – 4. Open Terminal and Update Mac Ports sudo port -v selfupdate 5. Install AirCrack-ng sudo port install aircrack-ng. Jimoody It’s killing me off.

MacPorts doesn’t want update itself. And Aircrack doesn’t want to install.

Ubuntu Networking:: Alfa AWUS036NH Card Not Working With Aircrack-ng Jun 5, 2011 Im running Ubuntu 11.04 with alfa awus036nh. I first tried to install drivers from alfa disc for RT3070. Everything seemed to be working but i got the imfamous mon0 channel -1 problem with aireplay-ng. Did some research-downloaded and tried different drivers rt2800 rtl 8170. Bottom line is i dont know what THE F. im doing.

I think i installed three different drivers. Now airodump doesnt show any output. Im going crazy. Is linux designed to make ppl go crazy. Windows is calling me to go back to it.

THings shouldnt be this complicated. BTW im on a asus laptop with atheros ar 9285 card in it. A breif explanation of how drivers work in linux.

Once again maybe im just putting the cart b4 the horse as im only about 2 weeks fresh into ubuntu. Similar Messages:. ADVERTISEMENT Jun 5, 2011 I have a Alfa AWUS036NH that I have downloaded the lastest drivers from Alfa. I have read for 3 days straight and tryed so many fixes I cant remember them all. My problem is that it connects then after about 15 minutes the connection degrades and i have to unplug and replug in and then it goes down sooner each time. I have edited the black list and blacklisted all the 2870 chipsets as mine has 3070 chipset.

Once i edited the blacklist I can no longer boot into linux unless I unplug my Alfa (usb) and then once I am into the UI I can plug it back in but the wirless management client up by the top right of my screen that came with ubuntu no longer sees the card and when I do the show devices command from a terminal it doesn't show the adapter either. I also have a wired eth0 that works and a wireless wlan0 thats an internal Aethros that works. After blacklisting though it no longer shows it's name in the wireless manager but does show the connections. I am getting errors when trying to compile the manufactors drivers. I have renamed the 2 files as per several posts and still errors. I have read it works if you load the intel 2200 drivers.

I got the compiler and everything but am missing the ieee80211 wireless what evers to compile and make it work. I am at wits end at what to do now to fix it. May 4, 2010 if i can find out whether my wireless card is compatible with aircrack, after running the lshw -C network command i received these results.-network description: Ethernet interface product: RTL-8139/8139C/8139C+ vendor: Realtek Semiconductor Co., Ltd. If my wireless card is compatible with aircrack.

Jul 15, 2010 ive just installed the aircrack package in my dell vostro 1310 which i bought with its ordinary wireless card ( hell knows what it is. Couldn't find.).At the very first time while trying to reach my wireless internet i was using backtrack 4 and i was not sucesfull. That would be good normally, but it was not. Because i couldnt do it cuz my wireless card wasnt being recognized by airmon.so i tought.i can use my wireless with ubuntu. Then i got ubuntu again. And intalled the aircrack. As i run it i found ou t that still it wont find my wireless card.do i need any further config.

To make it work with aircrack??i can only find eth0, which is my wired network device. Dec 5, 2010 seems to be working but the card is scrolling through channels while trying to attack a certain channel! How do i stop it? Feb 19, 2010 I have an laptop HP6735s (BCM4322 wireless adapter). I have installed drivers for wireless adapter. The problem is aircrack. When I type in: aireplay-ng -9 eth2.An error appears as:sure RFMON is enabled: run 'airmon-ng start eth2 'sysfs injection support was not found either.

Jul 20, 2010 I am running Lucid Lynx, kernel 2.6.32.23 generic, I have a card with the Broadcom BCM4311, with the STA Linux Wireless driver. I have no idea how to get monitor mode to work with the Aircrack-ng suite's Airmon-ng command.

I use the command: sudo airmon-ng start eth1 And I get this output: Found 5 processes that could cause trouble. If airodump-ng, aireplay-ng or airtun-ng stops working after a short period of time, you may want to kill (some of) them! PID Name 883 NetworkManager 893 avahi-daemon 896 avahi-daemon 931 wpasupplicant Code. Mar 25, 2011 i have Broadcom Corporation BCM43225 and aircrack doesnt working, i think problem is in drivers but i dont know what can i do.

I was looking for but i diddnt find any working;/ Jan 29, 2010 I just installed ubuntu 9 and I went to package manager to install aircrack-ng version 1:1.0-1 and it says that it has installed but then when i go to applications/internet/aircrack is not shown. Jan 21, 2010 I bought an Alfa Network AWUS036NH adapter that I want to use with Ubuntu 9.10 Desktop.it looks like it won't connect automatically and the install instructions don't make any sense to me. I've installed from source before, but this is different. See here: Quote: Build Instructions: 1 $tar -xvzf DPBRT2870LinuxSTAx.x.x.x.tgz go to './DPBRT2870LinuxSTAx.x.x.x' directory.

2 In Makefile set the 'MODE = STA' in Makefile and chose the TARGET to Linux by set 'TARGET = LINUX' define the linux kernel source include file path LINUXSRC modify to meet your need. Feb 12, 2010 I have Ubuntu 9.10 and I am trying to get my ALFA network adapter to work.

It shows a few wireless locations including my brother who lives beside me. He is going to let me use his internet on my laptop. His connection is opened and I can connect to it fine. But no sites load. I've tried about 4 other open networks that I picked up and the same thing. It sometimes loads the first page but then thats it. This is suppose to be the best network adapter on the market for under $100.

I have a 5dBi ant and a 2.4ghz 6dBi ant. Oh yea, I've tired this on two other ubuntu 9.10 desktops and 1 laptop and get the same thing. I am however able to connect to my wireless router and browser the internet.

But I will not have internet much longer Sep 23, 2010 Allright so I installed Ubuntu a week ago, I realized by net is much slower on Ubuntu than on Windows. So I did some Googling and found out I have the wrong drivers.I'm trying to fix it from this link:URLWhen I try to write in Sudo codes into terminal they don't work.

They ask for a password, I put mine in and press enter I get the following message:shayan@ubuntu:$ sudo modprobe rtl8187shayan@ubuntu:$ Dec 8, 2010 I work for a firm of solicitors as the IT guy and I have been asked to assess the security of our network. I have recently bought an ALFA AWUS036H USB wireless adapter to help test the wireless networks. We have a few old devices that only run WEP, which I know from the start is bad. I'm trying to use the adapter with aircack. I issue the command: code. Now I set the adapter to channel 11 using airmon but running iwlist mon0 channel says the adapter is not running on any channel at all. Has anyone else experienced simular issues, and if so how was this resolved?

Download Aircrack Wifi Hack

Jan 5, 2010 i have ALFA AWUS036H 500mw wireless card which uses RTL8187L chipset. Ubuntu 9.04 and 9.10 come with preloaded rtl8187 driver but they DO NOT work for internet surfing. However they do work with aircrack suit for injecting etc. Specific problem is: They only work with really close ranged AP, anything far and you will have random disconnects or inability to connect.

So basically its unstable compared to patched driver. To get this alfa card working for internet access, the only way currently is to use any LInux distro with Kernel 2.6.30 and lower. Starting from Kernel 2.6.31 they have made some changes to net api structure which wont let you patch the driver with the patch available at aircrack website which is normally used to make this driver suitable for internet browsing. Refer to this thread for more info: URL. I am currently using backtrack 4 pre final but i was going to install kubuntu 9.04 till i recieved an email from realtek with a new driver that compiles in kernel 2.6.31.

I tested it on Kubuntu 9.10 and it compiled fine but i could not make it run. Under NetworkManagement for Kubutnu, the problem is that it keeps asking for WEP key and gives me the message 'wlan4 failed to connect' instantly after i enter the key, so its possible that its not compatible with NetworkManagement. I havent tried it with wicd yet, it may work.

Jul 25, 2011 I had an Ubuntu Server 32 bit installation and everything was working fine. Now that I installed Ubuntu Server 64bit on a new drive in the same machine, the ethernet card is not working!! This is insane cause when I put the hard disk with the 32bit installation back and booting from it, the ethernet card is working without any problems but in the 64bits installation it is not shown at all using 'ifconfig -a' lspci output: Quote: 02:00.0 Ethernet controller: Atheros Communications AR8151 v1.0 Gigabit Ethernet (rev c0) How can I check which module is being loaded in the 32bits installation to try to load it manually in the 64 bits installation? Jul 28, 2011 I am trying to get the drivers and patches for my alfa AWUS036EW on BackTrack 5 with these instructions: URL Everything works until I type make I get this message: Code. Sep 13, 2010 I have Ubuntu 10.04 (32 bits) and a wireless usb adaptor Alfa Network AWUS036H with Chipset Realtek 8187L.

After a few minutes connected, the adaptor disconnects and I can't reconnect again. I search this forum but I'm not sure about what to do. Do I need to get and install another driver?

I need to use the windows driver? Oct 13, 2010 I recently bought the Alfa AWUS036h which uses the Realtek rtl8187 chipset. I am able to load the module and connect to any network, but its almost as soon as I try to load a page the connection drops. It never stays connected for more than 30 seconds. My other computers using the same adapter in the same spot work fine, unfortunately there not running slackware. I've tried compiling the newest stable kernel and checked the rd.inet1.conf settings.

Aug 15, 2010 I don't know why this happen a lot of time. But my first trial I successful to crack my neighbor WEP key and it write down the password beside that. But now, it doesn't show the decrypted password even the process was successful. Here the url of image URL. Sep 29, 2010 fertech@fertech-laptop:$ sudo apt-get install aircrack-ng Reading package lists. Done Building dependency tree Reading state information.

Done E: Couldn't find package aircrack-ng fertech@fertech-laptop:$ Mar 12, 2010 I'm having an issue with aircrack-ng, when I use an aireplay-ng I don't get any ACKs from my network. I'm using a RNX-EASYN1 with a rt3070 chipset on ubuntu 9.10 That's my command: HTML Code: And that's what comes up after: HTML Code: This one is for my network, but I tried it for some other networks just to check if there's something wrong with my network.

But I didn't get any ACKs anyway. I'm not very familiar with aircrack-ng, because I just started to play with it, please if there's somebody who's good with using an aircrack-ng. Dec 31, 2010 I've just bought a GEETEK Hercules USB Wlan adapter, which has the Ralink rt3072 chipset.

The Connection manager can find wireless APs, but it won't connect to any of those. Also, aircrack-ng does not find any APs while scanning.After some tinkering and a lot of restarting, I can now connect t wireless networks, although slowly. However, I still can't use it with aircrack-ng. Aug 13, 2011 I was wondering if there is a way to manually patch Aircrack -ng with 'airodump-ng-channel-handling-broken-fix.patch' without installing compact wireless package, because I end up with nonfunctional network when I compile compact wireless package. If possible where to paste that patch? Sep 1, 2011 I have install the broadcom sta wireless driver on my laptop it works fine but i guess it's not compatible with aircrack cause i cant scan using the wepcrackgui. So I try install b43 driver but I always have the same error when I type on the termial code.

What is going on? Im using Ubuntu natty 11.04 Oct 19, 2010 I have an Acer Aspire One -532h and i just installed ubuntu 10. I am trying to crack my own Wep network at home with Aircrack-ng. So after i installed Ubuntu and installed everything in 'updatemanager', i installed Aircrack,Macchanger.

And as i look in 'iwconfig' and ifconfig i see the Atheros driver Ath9k and Wlan0. Now my 1st question. Do i have to install madwifi or such for the aircrack to inject? 2:nd I have tried to install madwifi also but when aireplay-ng want to inject,the whole computer freezes. How do i fix this?have looked aound google and found that many have the same trouble.

Feb 2, 2011 I am trying to audit my wireless router due to someone in the neighbourhood hacking it, and have run into a few problems. When I run airodump-ng, everything works fine.